SHOPPING CART
0
items -
$0.00
PIC16F877A-I/SP (PDIP-40)
$9.50
Tax excluded
Pin Diagram:
Features & Specification:
CPU
- Up to 5 MIPS performance
System
- 33 I/O Pins with Individual Direction Control
- 20 MHz Clock Input
- 14 KB Program Memory
- 368 bytes RAM
- 256 bytes EEPROM
- Operating Voltage Range – 2.0V to 5.5V
- 25mA Source/Sink current I/O
Analog Features
- 10-bit ADC, 8 channels
- Two Analog comparators
- Programmable on-chip voltage reference(VREF) module
- Programmable input multiplexing from device inputs and internal voltage reference
- Comparator outputs are externally accessible
Peripherals
- Timer: 2 x 8-bit, 1 x 16-bit
- Two Capture, Compare, PWM modules
- Capture is 16-bit, max. resolution is 12.5 ns
- Compare is 16-bit, max. resolution is 200 ns
- PWM max. resolution is 10-bit
- Synchronous Serial Port (SSP) with SPI™(Master mode) and I2C™ (Master/Slave)
- Universal Synchronous Asynchronous ReceiverTransmitter (USART/SCI) with 9-bit address detection
Download:
- PIC16F877A Data Sheet: Link
FEATURED PRODUCT
You might also like
Please choose the latest iCP02v2 USB PIC programmer model
For bulk order on this model, please contact us. iCP01v2 USB ICSP PIC programmer used for programming the Microchip PIC10F, PIC12F, PIC16F, PIC18F, dsPIC30 family with PICkit 2 and MPLAB IDE software.
USB PIC Programmer Set allows users to program their hex code into Microchip Flash PIC MCU by using In-Circuit Programming (ICSP) method or Off-Board Programming (Adapter) method with MPLAB and PICKit 2 software.
NEW iCP02v2 is used for programming the Microchip PIC10F, PIC12F, PIC16F, PIC18F, PIC24F, dsPIC30, dsPIC33 family and serial EEPROM 11LCXX, 24LCXX, 25LCXX, 93LCXX and KEELOQ HCSXX with PICkit 2 and MPLAB IDE software.
iCA03 allows users to program 5V or 3.3V Flash PIC MCU by using In-Circuit Programming (ICSP) method or Off-Board Programming (Adapter) method.
Customers who bought this product also bought:
4x20 LCD display can be used to display up to maximum of 80 characters. Free Hi-Tech C coding is provided for the LCD control.
Multi PIC & EEPROM programming adapter which can supports the PIC10F, PIC12F, PIC16F, PIC18F family and serial EEPROM (24LCXX and 25LCXX) by using single ZIF socket.
8x IO Port is used to extend the normal IO port to 8x IO with GND pins for the switch input.
4x3 Keypad is used to allow user to key in decimal number (0-9), * and # keys.
This PIC16F877A is a 40-pin Flash-based 14 KB microcontroller with 8x 10-bit A/D Converter, 2x comparators, UART, A/E/USART and SPI, I2C1-MSSP (SPI/I2C) peripherals.